On this page, we have shared the download link and guide to install the Motorola XT2055-4 (Moto G8 Power Lite) firmware flash file using the SP Flash tool (also known as the Smartphone flash tool). Here you will find all stock firmware zip files for all the supported Motorola G8 Power Lite XT2055-4.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Moto G8 Power Lite Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Moto G8 Power Lite
  • You can fix the boot loop issue on Moto G8 Power Lite
  • Fix Unfortunately, the app has stopped error on Moto G8 Power Lite
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Moto G8 Power Lite
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Moto G8 Power Lite back to Factory State
  • Bypass Pattern lock on your device

How to Flash Motorola XT2055-4 Firmware File

Before installing the Stock ROM on your Moto G8 Power Lite, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

  • Supported device: Moto G8 Power Lite XT2055-4
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup of your android phone
  • Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Motorola USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

Disclaimer:

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Moto G8 Power Lite, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  • That’s it! You can reboot your Moto G8 Power Lite

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Motorola G8 Power Lite device successfully. Feel free to ask in the comments below for any queries.