In this tutorial, we will guide you on how to install the stock ROM flash file on Motorola Moto E6 XT2005-4 (codenamed surfna). The device came out of the box with Android 9.0 Pie and powered by Qualcomm Snapdragon 435. If you are someone who is looking to fix your device’s common issues like boot loop, repair IMEI, or fix any software issue, then this guide is for you.

To install the firmware flash file on Motorola E6 XT2005-4, you need to download the software called ADB and Fastboot tool. This method simple and easy.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Motorola E6 XT2005-4 (surfna) Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Motorola E6
  • You can fix the boot loop issue on Motorola E6
  • Fix Unfortunately, the app has stopped error on Motorola E6
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Motorola E6
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Motorola E6 back to Factory State

Moto E6 XT2005-4 Firmware Flash Files:

Steps to Install Motorola XT2005-4 Firmware Flash File

If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Moto E6 XT2005-4. Make sure to follow the steps carefully.

Pre-Requirements:

  • This ROM is supported for the Moto E6 XT2005-4 (surfna) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Firmware Installation Guide:

Check out the firmware flashing guide below for the Moto E6 XT2005-4. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Disclaimer:

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Moto E6 into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash modem NON-HLOS.bin
  • fastboot flash fsg fsg.mbn
  • fastboot erase modemst1
  • fastboot erase modemst2
  • fastboot flash dsp adspso.bin
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash system system.img_sparsechunk.0
  • fastboot flash system system.img_sparsechunk.1
  • fastboot flash system system.img_sparsechunk.2
  • fastboot flash system system.img_sparsechunk.3
  • fastboot flash system system.img_sparsechunk.4
  • fastboot flash system system.img_sparsechunk.5
  • fastboot flash system system.img_sparsechunk.6
  • fastboot flash system system.img_sparsechunk.7
  • fastboot flash system system.img_sparsechunk.8
  • fastboot flash system system.img_sparsechunk.9
  • fastboot flash vendor vendor.img
  • fastboot flash oem oem.img
  • fastboot erase carrier
  • fastboot erase userdata
  • fastboot erase ddr
  • fastboot oem fb_mode_clear
  • fastboot reboot
  • Now your device will reboot into bootloader with the firmware you installed

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastboot erase modemst1 fastboot erase modemst2 fastboot flash dsp adspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash system system.img_sparsechunk.9 fastboot flash vendor vendor.img fastboot flash oem oem.img fastboot erase carrier fastboot erase userdata fastboot erase ddr fastboot oem fb_mode_clear fastboot reboot