In this guide, we’ll be sharing the easy steps to install the Motorola XT1970-2 (Motorola One Vision) firmware flash file. As an open-source platform, Android devices do come with plenty of customization options which can also lead to bricking or being stuck in the boot loop issue due to unsupported file flashing or even improper flashing steps. Needless to say that most Android users want to heavily customize their devices via flashing third-party firmware files or rooting.

In some cases, the device performance may become slow, starts lagging, networking issues, etc. So, installing the stock firmware on your Motorola Motorola One Vision (codenamed kane) device will bring back a stable life like before.

Steps to Install Motorola XT1970-2 Firmware Flash File

Now, if you’re ready to flash the stock firmware manually on your Motorola Motorola One Vision XT1970-2 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

  • This ROM is supported for the Motorola Motorola One Vision XT1970-2 (kane) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Motorola One Vision XT1970-2 Firmware Flash Files:

Firmware Installation Guide:

Disclaimer:

Check out the firmware flashing guide below for the Motorola Motorola One Vision XT1970-2. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola Motorola One Vision into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot flash pit diskmap.pit
  • fastboot flash fwbl1 fwbl1.img
  • fastboot flash ldfw_a ldfw.img
  • fastboot flash ldfw_b ldfw.img
  • fastboot flash keystorage_a keystorage.img
  • fastboot flash keystorage_b keystorage.img
  • fastboot flash bootloader_a bootloader.img
  • fastboot flash bootloader_b bootloader.img
  • fastboot flash modem_a modem.bin
  • fastboot flash vbmeta_a vbmeta.img
  • fastboot flash oem_a oem.img
  • fastboot flash oem_b oem_other.img
  • fastboot flash logo_a logo.bin
  • fastboot flash dtbo_a dtbo.img
  • fastboot flash boot_a boot.img
  • fastboot flash system_a system.img_sparsechunk.0
  • fastboot flash system_a system.img_sparsechunk.1
  • fastboot flash system_a system.img_sparsechunk.10
  • fastboot flash system_a system.img_sparsechunk.2
  • fastboot flash system_a system.img_sparsechunk.3
  • fastboot flash system_a system.img_sparsechunk.4
  • fastboot flash system_a system.img_sparsechunk.5
  • fastboot flash system_a system.img_sparsechunk.6
  • fastboot flash system_a system.img_sparsechunk.7
  • fastboot flash system_a system.img_sparsechunk.8
  • fastboot flash system_a system.img_sparsechunk.9
  • fastboot flash system_other.img_sparsechunk.0
  • fastboot flash system_other.img_sparsechunk.1
  • fastboot flash system_other.img_sparsechunk.2
  • fastboot flash vendor_a vendor.img
  • fastboot erase userdata (Do it, if you want to clear all your data)
  • Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot flash pit diskmap.pit

fastboot flash fwbl1 fwbl1.img

fastboot flash ldfw_a ldfw.img

fastboot flash ldfw_b ldfw.img

fastboot flash keystorage_a keystorage.img

fastboot flash keystorage_b keystorage.img

fastboot flash bootloader_a bootloader.img

fastboot flash bootloader_b bootloader.img

fastboot flash modem_a modem.bin

fastboot flash vbmeta_a vbmeta.img

fastboot flash oem_a oem.img

fastboot flash oem_b oem_other.img

fastboot flash logo_a logo.bin

fastboot flash dtbo_a dtbo.img

fastboot flash boot_a boot.img

fastboot flash system_a system.img_sparsechunk.0

fastboot flash system_a system.img_sparsechunk.1

fastboot flash system_a system.img_sparsechunk.10

fastboot flash system_a system.img_sparsechunk.2

fastboot flash system_a system.img_sparsechunk.3

fastboot flash system_a system.img_sparsechunk.4

fastboot flash system_a system.img_sparsechunk.5

fastboot flash system_a system.img_sparsechunk.6

fastboot flash system_a system.img_sparsechunk.7

fastboot flash system_a system.img_sparsechunk.8

fastboot flash system_a system.img_sparsechunk.9

fastboot flash system_other.img_sparsechunk.0

fastboot flash system_other.img_sparsechunk.1

fastboot flash system_other.img_sparsechunk.2

fastboot flash vendor_a vendor.img

fastboot erase userdata (Do it, if you want to clear all your data)